Wagner Puma 28-40 Piston Pump

£1,899.00

High-pressure piston pump for industrial coating applications.

 

This product comes factory spec, a bare unit without any guns or hoses attached. For a complete set–up, see the AirCoat and Airless Spraypack versions. 

 

SKU: 2329467 Category: Tag: Brand:

Description

The Wagner Puma 28-40 (part no. 2329467) is a high-pressure piston pump specialised for airless and AirCoat applications. It delivers smooth finishes on wood, plastic, and light metal surfaces. It combines a constantly uniform material flow with low pulsation to maximise surface finishing quality. IceBreaker technology also prevents icing throughout continuous use. The stainless-steel body processes both water-based and solvent-based materials, saving costs and increasing production efficiency. It suits medium-low viscosity paints, stains, primers, and standard industrial coatings on smaller production lines.

 

 

FAQs

 

What is the Wagner Puma 28-40 piston pump used for?

 

The pump runs in both airless and air-assisted airless setups, primarily applying industrial coatings to wood, plastic, and metal.

 

 

What type of material can it spray?

 

It processes medium-low viscosity paints, stains, and primers, as well as moisture-sensitive materials.

 

 

Is there a complete list of spares and parts for the pump?

 

Yes. You can find the full, up-to-date operating manual with a complete parts list in the datasheet downloads section of the product page.

 

 

What air supply do I need?

 

The Puma 28-40 uses 8.3nl of air per double stroke at 6 bar, running at up to 60 strokes per minute. For continuous full-rate spraying, your air supply needs to deliver about 500nl/min. For lighter, single gun setups, an air supply delivering 300-350nl/min may be sufficient. Check with us for advice on your setup.

 

 

How often does it need servicing?

 

Check filters and hoses daily, with regular checks for damage or leaks. Wagner recommends annual servicing to replace wear parts, you can book this or any repairs with us by contacting service@app-tec.co.uk.

 

 

Read more on the Wagner website: https://www.wagner-group.com/uk/industry/products/liquid-coating/product/puma-28-40/

 

Technical specs

Weight16 kg
Air inlet pressure

2.5-8bar

Max. material pressure

224bar

Volumetric flow per double stroke

40 cm³

Volumetric flow per minute

2.4L/min

Max. stroke rate

60:1/min

Transmission ratio

28:01:00

Datasheet downloads

You may also like…