Description
The Wagner Leopard 35-70 (part no. 2329479) is a high-pressure piston pump built for airless and AirCoat applications. It delivers smooth finishes on wood, plastic, and light metal surfaces. It combines a constantly uniform material flow with low pulsation to maximise surface finishing quality. IceBreaker technology also prevents icing throughout continuous use. The stainless-steel body handles both water-based and solvent-based materials, saving costs and increasing production efficiency. It suits medium-low viscosity paints, stains, primers, and standard industrial coatings on smaller production lines.
FAQs
What is the Wagner Leopard 35-70 piston pump used for?
The pump runs in both airless and air-assisted airless setups, primarily applying industrial coatings to wood, plastic, and metal.
What type of material can it spray?
It processes medium-low viscosity paints, stains, and primers, as well as abrasive, shear-sensitive, and moisture-sensitive materials.
Is there a complete list of spares and parts for the pump?
Yes. You can find the full, up-to-date operating manual with a complete parts list in the datasheet downloads section of the product page.
What air supply do I need?
The Leopard 35-70 uses 18.6nl of air per double stroke at 6 bar, running at up to 60 strokes per minute. For continuous full-rate spraying, your air supply needs to deliver about 1,200nl/min. For lighter, single gun setups, an air supply delivering 600-800nl/min may be sufficient. Check with us for advice on your setup.
How often does it need servicing?
Check filters and hoses daily, with regular checks for damage or leaks. Wagner recommends annual servicing to replace wear parts, you can book this or any repairs with us by contacting service@app-tec.co.uk.
Read more on the Wagner website: https://www.wagner-group.com/uk/industry/products/liquid-coating/product/leopard-35-70/
