Description
The Wagner Basic 4000 Suspension Powder Coating Spray Booth offers a cost-effective solution for small powder coating operations. Its compact, modular design makes it ideal for coating individual parts, handling small production runs and applying multiple colours in confined workspaces. High-performance suction and integrated powder recovery ensure efficient powder handling, while automatic filter cleaning with interval control maintains reliable operation. The booth accommodates workpieces up to 800mm x 1200mm and features a rotatable suspension hook at the front, providing easy access for manual spraying. Its energy-efficient air circulation system returns extracted air to the workplace and complies with ATEX standards. Wagner also makes installation straightforward: the booth arrives pre-assembled and includes installation guidance, allowing users to set it up with ease.
.
.
FAQs
What is the Wagner BASIC 4000 Suspension powder booth used for?
The BASIC 4000 is a modular powder coating booth for manual finishing of single parts in small productions. It is economical and offers all basic functions suited to powder coating small to medium workpieces. The booth complies with the technical requirements in accordance with CA and ATEX standards.
What type of material can it process?
It processes organic powder coatings, including metallic powders only.
How quick is the setup for colour changing?
Keep the extraction and filter cleaning running throughout. Clean the powder feed parts and booth interior, scrape powder from the walls with a rubber scraper, and remove it with an industrial vacuum. For powder recovery, Wagner recommends one set of filter cartridges per powder shade. Store spare sets in their packaging, and swap them in when you change colour. Recovered powder collects on the booth floor and can be removed through the disposal opening.
Is there a complete list of spares and parts for the product?
Yes. You can find the full, up-to-date operating manual with a complete parts list in the datasheet downloads section of the product page.
How much compressed air does it use?
The Basic 4000 uses 25 m³/h of compressed air for the filter cleaning system, at a supply pressure of 6–8 bar. Inside the booth, a pressure regulator sets the filter cleaning tank to 4 bar.
How is the booth maintained?
The filter cartridges are cleaned automatically with compressed air pulses, and the cleaning interval is controlled from the cabinet. A differential pressure monitor lights a red warning on the control cabinet if the filters become clogged (above 1.7 kPa), so you know when the cleaning cycle or cartridges need attention. In addition, ensure you drain any condensate from the compressed air tank when required.
How often does it need servicing?
Check grounding and flush gun and hoses daily. Under BS EN 50177 for ignitable powders, a skilled person should test the extraction interlock annually, check high-voltage parts and grounding weekly. You can book servicing or any repairs with us at service@app-tec.co.uk.
Read more on the Wagner website: https://www.wagner-group.com/uk/industry/products/powder-coating/product/basic-4000-suspension-booth/



